设备的进场、上排:在各项准备工作完全做好的情况下,再开始组织设备的进场、上排和吊装工作。2、吊装前的准备工作:设备在吊装前,必须做好仔细的检查核实工作。检查设备安装基准标记、方位线标记是否正确;检查设备的吊耳是否符合吊装要求。
调节支腿,务必按规定顺序打好守全伸出的支腿,使起重呈水状态,调整机体使回转支承面的倾斜度在无载荷时不大于1/1000(水准泡居中)。 8、充分检查工作地点的地面条件。工作地点地面必须具备能将吊车呈水平状态,并能充分承受作用于支腿的力矩条件。 9、注意地基是否松软,如较松软,必须给支腿垫好能承载的木板或土块。
支腿不应靠近地基按方地段。 11、应预***进行调查地下埋设物,在埋设物附近放置安全标牌,以引起注意。 12、确认所吊重物的重量和***位置,以防超载。13、根据起重作业曲线,确定工作台半径和额定总起重量即调整臂杆长度和臂杆的角度,使之安全作业。 14、应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。