钢模板内外都分别做成两半的便于扯模模板用时刷一些隔离剂得看你是大批生产还是小做一两个了,要是小量的,可以用木板给管子做个反模啊,然后在向里加水泥,等到水泥干了在拿掉板子就可以了,在溉水泥的时候得有震捣设备啊,要不水泥管子没有强度的.在里面要加钢筋网格,要不管子是没有强度的,看你的管的直径大小来变换钢筋的直径。
钢筋混凝土排水管按bai混凝土管内径的不同du,可分为小直径管zhi(内径400毫米以下)、中直dao径管(400~1400毫米)和大直径管(1400毫米以上)。按管子承受水压能力的不同,可分为低压管和压力管,压力管的工作压力一般有0.4、0.6、0.8、1.0、1.2兆帕等。以上内容由佛山顺建水泥制品有限公司提供
钢筋混凝土水泥管的选择,首先检查进场混凝土管的质量,有无裂缝,承插扣质量等。再次,管到垫层平整度,管道接口基础。安装好后,管道两侧混凝土,接口处理是否符合图纸,选用图集要求等。安装好后回调图,要从两侧同时回调。找厂家的话可以考察下顺建达水泥制品有限公司