1、检查各安全保护装置和指示仪表应齐全。 2、燃油、润滑油、液压油及冷却水应添加充足。 3、开动油泵前,先使发动机低速运转一段时间。 4、检查钢丝绳及连接部位应符合规定。 5、检查液压是否正常。 6、检查轮胎气压及各连接件应无松动。
(5)在起重作业时要注意鸣号警告。 (6)在起重作业范围内除信号员外其他人不得进入。 (7)在起重作业时,要避免触电事故,臂杆顶部与线路中心的安全距离为:①6.6kv为3m②66kv为5m③275kv为10m。
在架体上或建筑物上安装设备时,其强度和稳定性要达到安装条件的要求。在设备安装定位后要按图纸的要求连接紧固或焊接,满足了设计要求的强度和具有稳固性后,才能脱钩,否则要进行临时固定。