检查各安全保护装置和指示仪表应齐全。 2、燃油、润滑油、液压油及冷却水应添加充足。 3、开动油泵前,先使发动机低速运转一段时间。 4、检查钢丝绳及连接部位应符合规定。 5、检查液压是否正常。
应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。 应预先估计绑绳套用钢丝绳的高度和起吊货物的高度所需的余量,否则不能把货物提升到所需的高度。应留出臂杆底面与叫货之间的空隙
严格按载荷表的规定,禁止超载,禁止超过额定力矩。 在吊车作业中***能断开全自超重防止装置(acs系统),禁止从臂杆前方或侧面拖曳载荷,禁止从驾驶室前方吊货。