1、连续边缘锯片:连续锯齿金刚石锯片,一般通过烧结方法制作,常用青铜结合剂作为基础胎体料,切割时须加水以保证切割效果,并有用激光将刀头切割缝隙的种类。2、刀头型锯片:锯齿断开,切割速度快,适合干、湿两种切割方法。3、涡轮型锯片:结合了前面1、2两项的优势,锯齿连续呈现涡轮状均匀凸凹,提高了切割速度,增加使用寿命。
不同的材料选用不同种类的金刚石锯片,不同粉类配方适合不同材质的特性,对材料产品的质量、效果、合格率乃至成本和效益造成直接的影响。影响金刚石圆锯片效率和寿命的因素有锯切工艺参数和金刚石的粒度、浓度、结合剂硬度等。据切参数有锯片线速度、锯切浓度和进刀速度。
锯切深度是涉及金刚石磨耗、有效锯切、锯片受力情况和被锯切石材性质的重要参数。一般来讲,当金刚石圆锯片的线速度较高时,应选取小的切消深度,从目前技术来说,锯切金刚石的深度可在1mm~10mm之间选择。通常用大直径锯片锯切花岗石荒料时,锯切深度可控制在1mm~2mm之间,与此同时应降低进刀速度。当金刚石圆锯片的线速度较大时,应选取大的切削深度。但当在锯机性能和刀具强度许可范围内,应尽量取较大的切削浓度进行切削,以提高切削效率。当对加工表面有要求时,则应采用小深度切削。