通常氮气瓶直接给蓄能气充氮时,如果蓄能器内所需预充氮气压力超过13.5MPa时,用直接充气法就无法达到蓄能器的充气要求,我公司生产的CDZ型充氮车(充氮小车,蓄能器充氮车,充氮设备,氮气增压设备)就能满足高压蓄能器充装高压氮气的要求。
济南泰顺厂家蓄能器充氮车试机前请将进口电接点压力表绿针(既进气压力下限)调到0 Mpa以下(出厂时设为3Mpa)。然后按下泵启动按钮,红色工作指示灯亮,电磁换向阀两端指示灯交替亮灭,增压泵开始上下往复运动。继续空负荷运转五分钟,检查液压站、增压泵或控制系统有无异常。
济南泰顺数控设备公司生产的充氮小车动力采用液压驱动,稳定;换向采用无触点电气控制,灵敏度高、无死点;增压泵留有泄漏孔,避免因密封损坏造成氮气污染;而且进气压力可控,输出压力可调。其结构紧凑、噪音低、移动灵活、操作方便,增压***、***,深受***广大用户的好评