2、每一垫铁组应放置整齐、平稳且接触良好。3、机床调平后,垫铁组伸人机床底座底面的长度应超过地脚螺栓的中心,垫铁端面应机床底面的外缘,平垫铁宜10 -30mm,斜垫铁宜10 -50mm,螺栓调整垫铁应留有再调整的余量。
山东重联起重现有200吨以内汽车吊1台、150吨随车吊2台、250吨以内大型平板车和15吨以内机动叉车共2台、另有设备吊装、设备装卸、设备搬运、设备包装、设备安装作业机械装备56台套。 山东重联起重实行重资产营运,现有技术人员、***工人均通过司索指挥、汽吊、司索、叉车等操作技术资质认证,公司以***人才、***技术和***管理优势,驾驭一整套特种起重运输车辆和***技术装备,以同一重联品牌、同一服务理念和同一***成熟的解决方案,加上山东本地优势,***环渤海经济发达区域的重型物流市场趋势。
数控设备的一般要求1、 垫铁的型式、规格和布置位置应符合设备技术文件的规定;当无规定时,应符合下列要求:(1)、每一地脚螺栓近旁,应至少有一组垫铁;(2)、垫铁组在能放稳和不影响灌浆的条件下,宜靠近地脚螺栓和底座主要受力部位的下方;(3)、相邻两个垫铁组之间的距离不宜大于 800mm;(4)、机床底座接缝处的两侧,应各垫一组垫铁;(5)、每一垫铁组的块数不应超过三块。