一般的外径千分尺锁紧装置有伞形紧固螺钉式与带扳手式,伞形紧固螺钉锁紧的只要长度合适、不滑牙,其锁紧作用都有效,带扳手式的需要修理,通常是把扳手拆下来,旋紧锁紧螺钉至锁紧有效时再把扳手安装在90位置上即可。
数显外径千分尺在相同条件下重复测量5次分别读数,以至大与至小读数差确定,采用量块时,其4块尺寸差为1/4螺距,每个量块以其同一部位放入下图所示的测量面间的4个位置上分别读数,以四组差值中至大值来确定。
使用前检查好零点,首先慢慢转动微调按钮,当测杆与测砧基础以后,棘轮就会出现声音然后我们只需要让活动套筒上的零刻线与固定套筒上的长横线对准即可,这也就表示我们将千分尺调整到位了。