根据起重作业曲线,确定工作台半径和额定总起重量即调整臂杆长度和臂杆的角度,使之安全作业。 14、应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。
)采用回转法或扳倒法吊装塔罐时,塔体底部安装的铰腕必须具有抵抗起吊过程中所产生水平推力的能力,起吊过程中塔体的左右溜绳必须牢靠,塔体回转就位高度时,使其慢慢落入基础,避免发生意外和变形。
在安装过程中,如发现问题应及时采取措施,处理后再继续起吊。 (3)用扒杆吊装大型塔类设备时,多台卷扬机联合操作,必须要求各卷扬机的卷扬速度大致相同,要保证塔体上各吊点受力大致趋于均匀,避免塔体受力不匀而变形。