(3)用扒杆吊装大型塔类设备时,多台卷扬机联合操作,必须要求各卷扬机的卷扬速度大致相同,要保证塔体上各吊点受力大致趋于均匀,避免塔体受力不匀而变形。 (4)采用回转法或扳倒法吊装塔罐时,塔体底部安装的铰腕必须具有抵抗起吊过程中所产生水平推力的能力,起吊过程中塔体的左右溜绳必须牢靠,塔体回转就位高度时,使其慢慢落入基础,避免发生意外和变形
根据与主体结构的关系塔吊分为自立式、附着式和内爬式。自立式塔吊的稳定完全依靠自身,分移动式和同定式两种:移动式塔吊设有行走底架,可在专设的轨道上负荷行走,作业范围大;当工地吊装工程量大没有多台塔吊,不需行走时可将底座同定在地面。
回转机构有两种设置方式:上回转和下回转。上回转的回转机构设置在塔身和塔顶之间,仅塔顶连同吊臂和平衡臂回转,塔身不转动,回转时塔身受竖向扭矩作用;下回转的回转机构设在塔身和底座之间,塔身连同塔顶一起回转,底座受竖向扭矩作用,塔身不受扭。小车连同吊钩可以沿吊臂水平移动,实现变幅。