辊皮在每一次压制成型完成后都要对辊皮做出清理,保证辊皮的球窝内部没有残留物,以免长时间不用,物料很难清洁出来,这样压球机压制成的球将会不规则,甚至会出现无法脱模的现象。辊子一旦出现无法脱模或者是出料不规则就要对辊皮做下调整了 压球机,长时间的运作有可能对辊皮造成移位,这样辊皮的球窝无法对照,球就无法成型,所以辊皮的清洁工作很重要。
给料部分,主要是实现定量给料来保证物料均匀进入对辊间。螺旋送料装置由电磁调速电机驱动,经皮带轮、蜗杆减速器转动,将被 压物料强制压入主进料口。由于电磁调速电机恒矩特性,当螺旋送料机的压料量与主机所需物料量相等时,可以保持恒定的供料压力使球团质量稳定。如供料量过大,则送料装置的电过载;供料量过小则不成球。因此熟练的操作技是保证压球正常工作的重要条件。
压球机使用后:1.保持压球机的清洁:在压球机压球过程中,会有大量的粉尘等脏物质,使用过后,就需要时刻清洁,保持压球机干净无灰尘,及时收集物料粉尘也起到了资源的二次合理使用。 2.检查机器,排除故障:有些机器出现故障在使用时无法发现或者暂时无法发现,这时候就需要对压球机进行观察、监控,发现故障应及时排除,把故障降到更小。