1、Mn13高锰耐磨钢板的切割,建议采用等离子切割。 等离子切割分为水下等离子和空气等离子切割两种。采用水下等离子切割时,等离子气体可产生几千度的高温,高锰钢板切口处迅速熔化,并因水的阻隔避免了氧化,水又对钢板及时进行冷却,阻止碳化物析出,使钢板切割面光滑平整,无热影响区,切割质量***佳,是切割高锰钢的***。也可采用空气等离子切割。
高锰钢是指含锰量在10%以上的合金钢,一般钢中锰元素的含量大于7%的,并以 锰元素为主的材料属于高锰钢。目前还很少有经轧制的高锰钢板,基本上是铸造的。高锰钢按照***分为5个牌号,主要区别是碳的含量,其范围是0.75%~1.45%。受冲击大,碳含量低。而一般不低于13%的高锰钢尚无***。只是锰含量大于18%,其中硅含量的高低,对冲击韧性影响较大,以不大于0.5为宜。
Mn13是高锰耐磨钢是抵抗强冲击、大压力物料磨损等耐磨材料中的***佳选择。高锰钢***特点有两个:一是外来冲击越大,其自身表层耐磨性越高;二是随着表面硬化层的逐渐磨损,新的加工硬化层会连续不断形成。Mn13轧制钢板对强冲击磨损和大应力磨损有***的耐磨性能,在使用过程中不会出现破碎,而且具有便于切割、焊接、弯曲等易机械加工性能。