轮胎式吊车需带载行走时,道路必须平坦坚实,载荷必须符合原厂规定。重物离地高度不得超过50cm,并拴好拉绳,较慢行驶,严禁长距离带载行驶。
3、吊装索具的系接:主要包括滑车挂***耳、电动卷扬机的拉力试验和方位调整、拖排牵引和拖尾系统的设置等。4、试吊:试吊前检查确认;吊装总指挥进行吊装操作交底;布置各监察岗位进行监察的要点及主要内容;起吊放下进行多次试验,使各部分具有协调性和安全性;复查各部位的变化情况等。
0、支腿不应靠近地基按方地段。 11、应预***进行调查地下埋设物,在埋设物附近放置安全标牌,以引起注意。 12、确认所吊重物的重量和***位置,以防超载。13、根据起重作业曲线,确定工作台半径和额定总起重量即调整臂杆长度和臂杆的角度,使之安全作业。 14、应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。