安装水平的检验要求数控机床完成就位和安装后,在进行几何精度检验前,通常要在基础上先用水平仪进行安装水平的调整。机床的安装水平调平的目的是为了取得机床的静态稳定性,是机床的几何精度检验和工作精度检验前提条件,但不作为交工验收的正式项目,即几何精度和工作精度检验合格,安装水平是否在允许范围不必进行交验。
床身导轨在垂直平面内的直线度;2、床身导轨在垂直平面内的平行度;3、床身导轨在水平面内的直线度;4、立柱导轨对床身导轨的垂直度;5、两立柱导轨正导轨面的共面度
在机床进行完资料归档和外观质量检验后,就涉及到了机床的就位和安装。这个阶段的工作直接影响后续的机床精度检验和机床正常运转。对于金属切削机床和机械设备安装,国家有两个明确的***。