我们常遇到设备的装、运、安装等项工作,不论是采用扒杆起吊或是机械吊装都应注意以下几点: (1)土法施工用的滚动法装卸移动设备,滚杠的粗细要一致,年度应比托排宽度长50cm,严禁带手套填滚杠。装卸车时滚边的坡度不得大于20,滚道的搭设要平整、坚实,接头错开,滚动的速度不宜太快,必要时要用溜绳。
(4)采用回转法或扳倒法吊装塔罐时,塔体底部安装的铰腕必须具有抵抗起吊过程中所产生水平推力的能力,起吊过程中塔体的左右溜绳必须牢靠,塔体回转就位高度时,使其慢慢落入基础,避免发生意外和变形。
3、吊装索具的系接:主要包括滑车挂***耳、电动卷扬机的拉力试验和方位调整、拖排牵引和拖尾系统的设置等。 4、试吊:试吊前检查确认;吊装总指挥进行吊装操作交底;布置各监察岗位进行监察的要点及主要内容;起吊放下进行多次试验,使各部分具有协调性和安全性;复查各部位的变化情况等。