应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。 应预先估计绑绳套用钢丝绳的高度和起吊货物的高度所需的余量,否则不能把货物提升到所需的高度。应留出臂杆底面与叫货之间的空隙
吊装索具的系接:主要包括滑车挂***耳、电动卷扬机的拉力试验和方位调整、拖排牵引和拖尾系统的设置等。 4、试吊:试吊前检查确认;吊装总指挥进行吊装操作交底;布置各监察岗位进行监察的要点及主要内容;起吊放下进行多次试验,使各部分具有协调性和安全性;复查各部位的变化情况等。
在架体上或建筑物上安装设备时,其强度和稳定性要达到安装条件的要求。在设备安装定位后要按图纸的要求连接紧固或焊接,满足了设计要求的强度和具有稳固性后,才能脱钩,否则要进行临时固定。