压印弯曲与有底凹模弯曲相同,只不过把凸模的前端加工成了需要的弯曲半径,而且冲程底端的凸凹模间隙小于材料厚度。由于施加足够的压力(大约是自1由弯曲的10倍)迫使凸模前端接触材料,基本上避免了回弹。
:铝条自动折弯机 弯框式高1档中空玻璃***设备,解决了插角式中空玻璃角部密封难的问题,本机由PLC控制,定位、折弯自动完成。性能***、操作方便。
不同工件材料因为本身结构不同,所使用的刀具也不相同,所产生的耐磨强度,抗拉强度,材料硬度,拉伸系数,可塑性等都不相同。选择模具时可根据机床的压力,结构,材质,工件展开尺寸,工艺要求,表面处理等进行合理选择。