对于有底凹模弯曲,模具角度一般为86 ~ 90。在行程的底端,凸凹模之间应有一个略大于材料厚度的间隙。成形角度得以改善,因为有底凹模弯曲的吨数较大(约为自1由弯曲的4倍),减小了弯曲半径范围内通常引起回弹的应力。
使用时由导线对线圈通电,通电后对压板产生引力,从而实现对压板和底座之间薄板的夹持。由于采用了电磁力夹持,使得压板可以做成多种工件要求,而且可对有侧壁的工件进行加工。
仔细考虑材料牌号以及较大加工厚度和长度。如果大部分工作是厚度16 gauge、大长度10英尺(3.048米)的低碳钢,那么自1由弯曲力不必大于50吨。不过,若是从事大量的有底凹模成形,也许应该考虑一台160吨位的机床。