防火门的质量和各项性能应能复合设计要求,品种、类型、规格、尺寸、开启方向、安装位置及防腐处理应复合设计要求。防火门的安装必须牢固,预埋件的数量、位置、埋设方式、与框的链接方式必须复合设计要求。防火门配件应齐全,位置安装正确,安装牢固,功能应能满足使用要求和防火、防盗门的各项性能要求。
防火门立门框,临时固定以及按线复核:在墙体厚度的方向上,按照图纸要求的位置把防火门门框放好。图纸没有特殊要求时,门框一般是安装在墙厚的中心线上,然后使用木楔进行临时固定,并按照水平和中心控制线来检查门框的安装位置,进行标高和垂直度调整。当门框无底槛框时,门框两侧的立框下脚必须买入地面面层之内,埋入深度不得小于20mm。
防火门的密封条、图进件安装要待面层油漆施工完成后才能进行。门扇安装完成进行调整,经检验后,将配套的密封条嵌入门框的槽口内,密封条的连接处和四个角部必须拼接严密,必要时可以适当加胶进行黏结。