操作人员应配带保护眼镜,系统工作过程中请远离埋设管路、安装有喷头或电磁阀的地方,确保人身安全。首先关闭系统主阀,通过控制器设置循环,开启各站电磁阀,减少主管路水压力,持续一段时间,利于水的排泄和空气的充分进入管路。连接压缩机与主管路的连接,注意调节阀门,使压缩空气压力不要超过0.35MPa。
若泄水井安装在室外,应保证泄水井的干燥(可以采用井底放置砾石);若在室内应确保排泄的水量不致于溢出水井。方法是:关闭系统主阀,切断水源,依次打开各轮灌区的控制阀(如电磁阀),减少管路系统水压力,然后慢慢手动开启泄水阀。
采用压缩空气法,选择和使用适当的压缩空气流量(17-42.5m3/h)是非常重要的,对于3“的主管,压缩空气流量可能需要212m3/h、对于4“的主管,压缩空气流量可能需要424m3/h。压缩空气压力不要超过0.35Mpa(如图3)、好采用压力调节阀以防止压力过高,若采用空气体积大、压力低的压缩空气,可消1除一些潜在的隐患。不要试图用高压力、低容量的压缩空气来排空水,这非常危险。因为空气的粘滞度比水的粘滞度小许多,能产生更大的威胁。