42减速机与机械设备间的正确安装类同减速机与驱动电机间的正确安装,关键是要必须保证减速机输出轴与所驱动部分轴同心度一致。
42减速机因为结构原因,单级减速至小为3,至大一般不超过10,常见减速比为:3.4.5.6.8.10,减速机级数一般不超过3,但有部分大减速比定制减速机有4级减速。
42减速机是一种动力传达机构,利用齿轮的速度转换器,将马达的回转数减速到所要的回转数,并得到较大转矩的机构,降速同时提高输出扭矩,扭矩输出比例按电机输出乘减速比。