冷镦螺帽工艺是少数无切削金属压力加工新工艺之一。它是一种利用金属在外力作用下所产生的塑性变形,并借助于模具,使金属体积作重新分布及转移,从而形成所需要的零件或毛坯的加工方法。冷镦工艺适于用来生产螺栓、螺钉、螺母、铆钉、销钉等标准紧固件。冷镦工艺常用的设备为的冷镦机。如生产量不太大,也可以用曲柄压力机或摩擦压力机代替。 冷镦工艺由于具有高的生产率,良好的产品质量,并大大减少材料消耗,降低生产成本,改善劳动条件,因此愈来愈广泛地应用在机械制造特别是标准紧固件的生产中,其中应用多工位冷镦机生产的有代表性的产品,是螺栓、螺钉和螺母。
冷镦螺帽加工艺流程订要有以下几种情况: 8.8级以下的螺纹紧固件产品加工流程打头→清洗→搓螺纹→清洗→表面处理→包装8.8级以下的螺纹紧固件产品加工流程打头→清洗→切削→热处理→穿垫搓螺纹→清洗→表面处理→包装8.8-10.9级螺纹紧固件产品加工流程打头→清洗→切削→搓螺纹→热处理→清洗→表面处理→包装10.9-12.9级螺纹紧固件产品加工流程打头→清洗→热处理→切削→滚螺纹→清洗→无损检测→清洗→表面处理→包装2.螺纹类紧固件常用材料螺纹类紧固件常用材料如下表1(含国内外材料对比)
冷镦螺帽与冷挤压基本上是同样条件的变形加工,但在操作方式上是不一样的。冷墩属于较小型工件的锻造变形,常用于紧固件工业。而冷挤压则属于较大型工件的挤压变形,用途较广泛;冷镦相当于是冷挤压的一个分枝,简单的来说做螺栓的工艺中,六角头成形属冷镦,杆部缩径属冷挤(正挤)。非切边六角法兰面螺栓(多工位成形)即有冷镦又有冷挤,六角螺母成形前边只有冷镦,后边工序挤孔属冷挤(正反挤)。