自动重合闸与继电保护的配合相当密切,两者配合工作,在很多情况下可以加快切除故障,提高供电的可靠性。其配合的主要方式是重合闸前加速保护和重合闸后加速保护两种。重合闸后加速保护。当被保护线路发生故障时,保护装置有选择的将故障线路切除,与此同时重合闸动作,重合一次。若重合于持续性故障时,保护装置立即以不带时限,无选择的动作再次断开断路器。这种保护装置叫做重合闸后加速,一般用一块中间继电器来实现。
自动重合闸方式的选定在110kV及以下电压等级的输电线路都采用的三项重合闸方式。在220kV及以上电压等级的输电线路除了三相重合闸方式外,还有单相重合闸、综合重合闸方式。
按重合闸动作次数可分为:一次重合闸、二次(多次)重合闸;重合闸如果多次重合于持续性故障,将使系统遭受多次冲击,后果严重。所以在高压电网中基本上均采用一次重合闸。只有110kV及以下单侧电源线路,当断路器断流容量允许时,才有可能采用二次重合闸。