开灯时应顺次开灯,每支灯间隔1分钟左右,不要同时打开;关灯后应当使风机继续运转一段时间,直致灯管冷却为止;关灯后如果要二次起动时,一定要等到灯管完全冷却后再起动,否则在灯管表面温度很高的情况下是起动不起来的; 开灯后不能立即投入生产,要有一段灯管预热时间,夏季温度高时,预热时间短;冬季温度低时,预热时间长些,预热时间要2—3分钟左右。如果UV设备有强弱光装置,应在强光档起动开灯,这样可以缩短灯管预热时间,若生产时需要弱光,可在预热结束后调至弱光档。
胶印印刷以其工艺精细色彩丰富应用广泛成为印刷品的主流印刷工艺,胶印印 刷对印刷品的伸缩变形和适应率高速印刷有较严格的要求,UV光固化机配套胶印印刷必须达到对印刷品的光固温度不能超过50C,才不会使印刷品伸缩变形,光固速度必须达到8000张/小时,配套智能自动收纸机才能适应胶印自动高速的印刷要求,常规UV光固化机使用的UV灯是高温低强度UV灯,对印刷品的光固温度达到70C至90C,UV光固速度4000张-5000张/小时,如提高UV灯功率来达到光固速度时,UV光固温度便会成倍升高,无法达到胶印印刷的严格工艺要求。而***的胶印低温高速UV光固机,使用的是进口低温高强度UV灯,低温高强度UV灯是一种使用高纯度发光电极,充入比例准确的高纯度发***体,通过***技术生产的高压***灯,工作电流小、温度低、强度高,比同规格常规UV灯发光温度低40%以上,发光强度高100%以上,胶印低温高速UV光固化机配套智能高速自动收纸机,对印刷品UV光固温度控制在45C,UV光固速度达到9000张/小时以上,符合胶印印刷低温高速的工艺条件,广泛应用于烟标包装印刷、彩印包装印刷等大型印刷行业。
一、百叶窗、三合板等 [3] 。二、侧板等。三、汽车内饰件(桃木)、PC面板、电动自行车、汽车大灯、钢管、硅橡胶等所有。四、电子行业:微电机、电路板、液晶开关、机箱外壳。五、印刷行业:丝印、胶印、柔印、喷绘、数码印刷等所有印刷范围,产品立体感强,外观漂亮新颖。六、特种行业:化工、光学反应、UV胶水、UV粘接等行业。