利用图1和图4的电路,可以实现多路遥控器,即在发射端,将IC1组成的低频振荡器,其电路模式不变,只改变电阻R2,即可构成若干种R组成的多个频— 率不同的低频振荡器(即编码),利用微动开关转接,38kHz的载波电路共用;在接收电路中,一体化红外接收头共用,再设置与接收端编码器相同个数的 LM567锁相器和后级锁相驱动控制电路,各锁相环的振荡频率与 各编码器的低频编码信号的频率对应相等。
遥控器 [1] 是一种用来远控机械的装置。现代的遥控器,主要是由 [2] 集成电路电板和用来产生不同讯息(传播学中的讯息定义:由一组相互关联的有意义符号组成,能够表达某种完整意义的信息。)的按钮所组成。 遥控器,这也是现代的无线遥控装置,他是利用超声波来调频道和音量,每个按键发出的频率不一样,但这种装置也可能会被一般的超声波所干扰,而且有些人及动物(如狗)听得到遥控器发出的声音。
图1是一种一路的红外遥控发射电路,在该电路中,使用了一片IC1高速CMOS型4-2输入的“与非”门74HC00集成电路,组成低频振荡器作编码信号(f1),用IC2555电路作载波振荡器,振荡频率为:f0(38kHz)f1对:f0进行调制,所以IC2的③脚的波形是断续的载波,该载波经红外发光二极管发送到空间。电路中的关键点A、B、B’波形如图2所示,其中B’是未调制的波形。