1、工地通道闸机地面与路面需同一平面、路面需时混泥土地面作为道闸基础。 取出箱内随机附件。 2、将箱体放置确定位置,打开箱门,用记号笔或螺丝刀在箱底板孔位处划线,并一开箱体。 使用冲击钻分别在几号出打上螺丝钉,孔深70-80mm,并置入螺丝,调好箱体水平、垂直度、拧紧螺母。
根据工地通道闸机实际尺寸在现场开槽预埋好2根6分-8分的塑胶管,三辊闸与三辊闸之间留50-100mm的间隙,为后面方便开启顶盖、调整机器、便于维护等,设备与设备之间预埋,必须采用一根胶管走电源线(强电),另一根胶管走信号线(弱电),不能同时将电源线和信号线走一个胶管,这样容易产生安全隐患通讯效果也会受到影响。预埋管要高出地面30-40mm高,走线桥式三辊闸应在两侧面为好,立式三辊闸应在机器中间底部较好。
1、工地通道闸机安装前进行室外闸机的检查,首先拆掉木箱包装。 2、其次木箱包装拆封后,是闸机的薄膜包装。 3、检查通道闸机的元器件是否有缺损。 4、进行闸机的安装位置确定。 5、确定好闸机安装位置后,打地基开始布线固定室外闸机。 6、人行通道闸机安装好,测试。