学生编完程序或将程序输入机床后,须***行图形模拟,准确无误后再进行机床试运行,并且刀具应离开工件端面200 mm以上。
手动原点回归时,注意机床各轴位置要距离原点-100mm以上,机床原点回归顺序为:首先+X轴,其次+Z轴。
在加工过程中,不允许打开机床防护门。对刀应准确无误,刀具补偿号应与程序调用刀具号符合。