当起重作业时,钢丝绳与电焊把线相接触,则会磨破把线的绝缘层,产生的电火花则会灼伤、熔断钢丝钢绳的钢丝,导致钢丝绳的承载能力下降直至报废,施工时没有发现时则会出现钢丝绳断裂,设备坠落。
在吊装作业中,有下列情况之一者不准吊装:a.指挥信号不明;b.超负荷或物体重量不明;c.斜拉重物;d.光线不足、看不清重物;e.重物下站人;f.重物埋在地下;g.重物紧固不牢,绳打结、绳不齐;h.棱刃物体没有衬垫措施;i.重物越人头;j.安全装置失灵。
1. 将吊钩和起重臂放到稳妥的位置,所有控制把柄均应放到零位;对使用电器控制的器械,必须将电源总开关关掉。2. 对在轨道上的起重机,应将起重机定住。3. 将吊索、吊具收回放置于规定的地方、对其进行检查、维护。达到报废标准的要及时更换。4. 对接替工作人员,应告知设备、设施存在的异常情况的异常情况5. 对起重机械进行维护保养时,切断主电源并挂上主吊牌加锁。