负荷运转试机时间不少于8小时,雷蒙磨工作正常后整机无异常噪音,各管道连接处无漏风现象,经试机后再次把各紧固体拧紧,即可投入正常使用。
准备 雷蒙磨运行现场还未安装时,应妥善保管,外露表面须涂上防锈油脂、并避免日晒雨淋,以防机体生锈进水,要建立保养制度。
同时,此种情况还可通过调整风机与主机间的余风管来达到气流的平衡,并将多余的气体导入小旋风收集器内,把余气带入的细粉料收集下来,后由小旋风收集器上段排气管入大气中,或导入收尘器内使排空气体净化,不过,对操作人员的技术要求比较高,而且需要及时发现并调整。