陶瓷喷砂工艺有两种解决方法:对于这个问题的解决。而未中和,因很多公司在进行过水时就直接是过清水。清水在被反复使用后,电解液残留在水槽内,所以会导致过水时工件外表会有残留药,所以工件在电解抛光后,需进行中和再清水,即可解决发黄的问题; 将发黄的工件进入到20%浓度浸泡两分钟即可。
陶瓷喷砂工艺利用金属在电解液中受到电化学腐蚀,更确切地叫作电化学阳极溶解,使工件加工成形,电解加工在加工时工件接直流电源的阳极,工具接上电源的阴极,工具向工件缓慢的进给,使两极之间保持较小的间隙,一般只有1mm以下,这时阳极工件的金属被电解腐蚀,腐蚀产物随后会由高速的和有一定压力的电解液带走。
陶瓷喷砂工艺原来经过表面抛光的不锈钢管,外观都会变得光洁亮丽,更加容易清洁保养。还会形成一层看不见的保护膜,能够防止不锈钢表面腐蚀,还不容易积垢,所以使用寿命会比没抛光处理的不锈钢管相对更长。进行不锈钢管抛光处理已经不仅仅是提高其美观度,更提升到其使用价值。使用起来更加耐用,使用范围更广。