四***单工位法兰自动焊横臂伸缩采用齿轮齿条副啮合传动,传动精度高,无爬行,无抖动。立柱和横臂的导轨焊后经震动时效消除应力。
四***单工位法兰自动焊升降用的链条通过立柱顶端的减速机联结到平衡配重块上。立柱下部整体安装在行走台车上,通过行走台车将操作机移动到需要焊接的外环缝位置,完成工件焊接。
四***单工位法兰自动焊安装注意事项有什么呢:1、在安装设备的时候必须要严格按照要求来安装,尤其是在安装电加热式的二氧化碳减压器的时候,如果没有按照要求安装就可能出现减压效果不好情况。2、在进行使用之前***行预热处理,预热时间控制在五分钟到十分钟左右,这样才能够确保设备在使用的时候可以更正常化使用。3、在打开气瓶的时候要控制好速度,一般只需要控制在5度每一秒就行,这时候你会看到压力表的针在动,等到其停在合适的刻度位置时候就可以放手。