现场大型吊车主要分布情况为:一联合装置分布750t履带吊、400t履带吊各一台以及200t履带吊2台;二联合分布400t履带吊和200t履带吊各一台,其他型号吊车根据现场情况调整,各吊车在施工中进行机动作业。大型吊车在机动作业时的行走路线、吊装时间按照施工方案提前规划。
(1)土法施工用的滚动法装卸移动设备,滚杠的粗细要一致,年度应比托排宽度长50cm,严禁带手套填滚杠。装卸车时滚边的坡度不得大于20,滚道的搭设要平整、坚实,接头错开,滚动的速度不宜太快,必要时要用溜绳。 (2)在安装过程中,如发现问题应及时采取措施,处理后再继续起吊。
吊装工程是指用起重设备将在工厂或工地预先制作好的构件或结构吊起,移动至***位置。除了预制构件外,施工过程中的材料、工器具也需要垂直运输到***高度。 常用的起重设备有塔式起重机、桅杆式起重机、履带式起重机、汽车起重机和浮吊等.用于不同种类土木工程和不同工地环境的结构吊装。