精密钣金喷砂加工有两种解决方法:对于这个问题的解决。而未中和,因很多公司在进行过水时就直接是过清水。清水在被反复使用后,电解液残留在水槽内,所以会导致过水时工件外表会有残留药,所以工件在电解抛光后,需进行中和再清水,即可解决发黄的问题; 将发黄的工件进入到20%浓度浸泡两分钟即可。
精密钣金喷砂加工如果是在光亮面进行修复时,可以采用抛光法,用不同目数的抛光轮反复打磨。而一般在亚光面修复则采用喷砂法,那就需要设备。如果是前期做过拉丝面板,也同样需要设备处理,无论采用上述何种方法,都必须对表面进行钝化处理。判断为轻微的划痕,如果是镜面的可以用抛光蜡对不锈钢板面进行抛光,如果是拉丝的可以用拉丝机对不锈钢表面进行拉丝。
精密钣金喷砂加工利用金属在电解液中受到电化学腐蚀,更确切地叫作电化学阳极溶解,使工件加工成形,电解加工在加工时工件接直流电源的阳极,工具接上电源的阴极,工具向工件缓慢的进给,使两极之间保持较小的间隙,一般只有1mm以下,这时阳极工件的金属被电解腐蚀,腐蚀产物随后会由高速的和有一定压力的电解液带走。