制作太原包边发光字的方法步骤: 1、太原包边发光字制作需要工具:30W或40W电烙铁、焊锡、电钻、胶qiang、螺丝刀等。 2、太原包边发光字制作需其它材料:成型烤漆铁皮字(尽量在当地购买以减少运输费用)、电线、LED招牌电源。 3、钻孔:把外购的成型铁皮字固定到合适的位置,用电钻钻孔(9mm),间距根据户外牌制安装的高度和制作成本而定的,一般LED中心间距为:10—30mm,间距赿小,亮度赿高,成本越高。 4、插灯:把钻好的孔清理干净,逐一放灯。 5、连线:有已经制作好并连线的防水LED灯串,每串有预留的线头,一般红色的接到电源的正极,黑色的线头接到LED电源的负极,电源放置在防水电源箱中。 6、测试老化:把所有的LED连好之后,检查处理不亮的,然后进行老化测试48小时。 7、运输到现场,搭脚手架现场安装。
太原包边发光字的制作步骤: 一步:制作源文件(是要做成矢量图);第二步:选择哪种发光字(点阵字、灯箱字、迷你字、树脂字、超级字、背光字);第三步:选择材料(不锈钢、铝板、亚克力和LED灯);第四步:机械加工(激光切割和CNC雕刻);第五步:焊接和打磨;第六步:喷油漆或其它的上色手段(电镀、水镀或喷粉);第七步:组装;第八步:清洁(表面的灰尘和油漆);第九步:包装(纸箱或木箱);第十步:出货安装(快递或物流)。
太原包边发光字工艺流程: 1.太原包边发光字制造工艺一般尺度在1.5m(延长米)以下的发光字箱体主张运用0.8mm厚冷轧板,箱体底面运用1mm厚冷轧板。尺度在1.5m(延长米)以上的发光字箱体侧面运用1.2mm厚冷轧板,箱体底面运用1.5mm厚冷轧板。底面与侧面焊接完成之后进行喷漆或烤漆处理。侧面厚度一般距离在10-12mm。此种形式多用于户外,视觉距离在20m以上; 2. 精密形式发光字箱体冷轧板、铝板、不锈制造工艺制造进程与一般形式的差异在于箱体选用精密点焊,多次打磨、抛光处理,再进行无尘烤漆,上漆进程与汽车钣金喷漆进程相同; 3. 发光字光源:LED(发光二极管)光源阐明LED发光字是当时发光字形式的干流,首要由于LED性冷光源12伏低压电,其长处就是节能、耐久、修理率极低,适用范围广; 4. 装置模组。