玻璃钢制品光泽度不高的原因:玻璃钢制品的表面光泽度不佳现象,常见的有:局部出现无光斑片,或者全部表面失去光泽。制品过早地脱模:或脱模剂选择不好 ;或模具的表面不干燥。
玻璃钢制品胶衣层的厚度要适宜,不能太薄,但也不能太厚,如果胶衣太薄,可能会固化不完全,并且胶衣背面的玻璃纤维容易显来,影响外观质量,起不到美化和保护玻璃钢制品的作用;若胶衣过厚,则容易产生龟裂,不耐冲击力,特别是经受不住从制品反面方向来的冲击。胶衣涂刷不均匀,在玻璃钢制品脱模过程中也容易引起裂纹,这是因为表面固化速度不一,而使树脂内部产生应力的缘故。
玻璃钢制品光泽度不高的解决办法:1、模具使用前,要充分抛光处理,上腊或抛光后,模具表面要用干净的纱布,擦去多余的敷层;2、制品充分固化后,才开始脱模;3、模具表面要保持干燥;