玻璃钢外饰件胶衣层涂制时需要注意:配置胶衣树脂时,要充分混合,特别是使用颜料糊时,若混合不均匀,会使制品表面出现斑点和条纹,这不仅影响外观,而且还会降低它物理性能。为此应尽可能采用机械搅拌进行混合,且较好用不产生漩涡的混合机,以避免混进空气。
提高玻璃钢外饰件的表面质量:胶衣树脂:为提高玻璃钢外饰件表面质量,产品表面一般需要一层带有颜色的富树脂层。胶衣树脂就是这种材料。胶衣树脂提高了玻璃钢外饰件的耐老化性,同时为玻璃钢外饰件提供一个均质的表面,提高了产品的表面质量。一般为保证产品有一个较好的表面质 量,要求胶衣层厚度在0.4?0.6mm。
提高玻璃钢外饰件的表面质量:模具对产品表面质量的影响:模具是玻璃钢外饰件成型的主要设备,模具按材质可分为钢、铝、水泥、橡胶、石蜡、玻璃钢等类型。玻璃钢外饰件模具以其成型容易、原材料易得、造价低、制造周期短易维修等特点,成为玻璃钢外饰件工艺较为常用的模具。