精轧机装载在加热炉的板坯连铸之后,计算结果被发送到自动控制系统,和轧机设备的配置精加工在预定时间内完成,并且在轧制过程中实际上精轧机,自动厚度控制调整实时厚度偏差,如今根据生产的实际情况,可以灵活调整来执行绕组的前端,头的厚度和轧机的尾部在公差范围内控制,并且减少了尾端下方对轧辊的损坏。
精轧机由几卷工作和两对支撑辊组成,具有更稳定的辊系统,然而其刚度类似于四层冷轧机的刚度,并且操作不方便,因此它没有被广泛使用,并且通常用于从高精度海底电缆轧制铜带,在冷轧机中间具有直径的一对辊子是工作辊,其余的是支承辊,它具有相对较高的刚度,可以滚动极薄的条带,初始多辊轧机由一卷工件驱动,然后由中间支承辊驱动。
精轧机适合用作冷轧钢板带,它是四个高度的磨坊的变种,工作辊的直径为支承辊的1/6,并且相对偏移以避免工作辊的水平弯曲,这是四辊轧机的轧制力的一半,工作辊的良好稳定性具有较高的水平刚度,其结构和调整比二辊轧机简单得多,该轧机可适用于多种型号,因此也称为多用途轧机,它有可逆和连续冷轧板,适用于冷轧的硅钢和有色金属钢。