铺设时,一定要留意确实清洁地面、确定地面平整,如果原地面不平整,务必要做自流平,否则会随地面有高低起伏现象,甚至造成之后有瑕疵情况。另外,水泥未经粉光步骤,也不可以直接铺设上去,这点要特别留意。
若于地板铺装完成后发现有局部产生“溢胶”情形时,建议可以用干抹布沾取一些“松香水”或“去渍油”,针对溢胶部分进行擦拭,即可将残胶清1除。
注意应从十字线往外粘贴,当采用乳液型胶粘剂时还应在塑料板背面和基层上同时均匀涂胶,即用3″油刷沿塑料板粘贴地面及塑料板背面各涂刷一道胶。