PP电镀槽焊接后如何检验:一、目视检验:再焊接前,中,后目视使其不可产生如下之情形:A. 焊接突缘不平整,太大或太小.B. 两pp管管不在同一轴线上.C. 焊接突缘表面有光泽(代表过热,且产生过大之冷却应力).二、非破坏性检验:A. 以电子手型式连接一支金属针以便测出焊接处漏气点与不纯物.B. 光检验:可由光图中检验出所有不良情形.C. 机械及破坏性检验。
PP电镀槽1.着色剂:着色剂可使塑料具有各种华丽美丽的色彩。阻燃PP板常用的有机染料和无机颜料作为着色剂。2.润滑剂:润滑剂的作用是防止塑料在成型过程中粘在金属模具上,同时还能使塑料外观光美观。 常用的润滑剂包括硬脂酸及其钙和镁盐。
PP电镀槽的维护:1、镀液一周分析一次,及时补加所缺的化工原料,使镀液各组分维持在工艺范围。每两天对镀液进行一次霍尔槽试片试验,以了解镀液的状态。2、每天检查过滤机状态,保证过滤机不漏气、不漏液,每星期清洗一次过滤机。3、安装冷却装置,保持镀液温度在30℃以下。4、注意槽压的变化,当槽压异常时要注意检查阳极的数量及导电情况。每周清洗一次阴极导电座来增强导电能力,防止因导电座导电不良而造成电镀中断电的现象。