复合防火风管通常是由两层薄板夹着一层保温材料构成。制作工艺如下:1. 准备原材料,包括内外两面和中间的隔热材料,这些都需要符合相关规定要求。2. 将备好的聚氨酯发泡材现场混合搅拌好,然后由熟练的技术人员按照施工图顺序将面筋、背网压贴于风管的内外壁上并确保粘合良好无气泡且厚度均匀。注意控制一次性固化程度适中,不宜过厚或过薄。3. 在整个施工过程中应严格遵守配料比例,严禁添加水或其他不相干物质,以防影响产品质量。同时要注意保护产品表面整洁干燥,不能有油渍灰尘等污染其上 。并且要采取适当的养护措施 ,以保持产品的性能和质量。在一定的时间过后(如24小时),经检查确认合格后方可投入使用。以上信息仅供参考,建议阅读对应文章获取更多关于复合防火风管的信息。