机床的安装水平的调平应该符合以下要求:l、机床应以床身导轨作为安装水平的检验基础,并用水平仪和桥板或***检具在床身导轨两端、接缝处和立柱连接处按导轨纵向和横向进行测量
、应将水平仪按床身的纵向和横向,放在工作台上或溜板上,并移动工作台或溜板,在规定的位置进行测量。3、应以机床的工作台或溜板为安装水平检验的基础,并用水平仪按机床纵向和横向放置在工作台或溜板上进行测量,但工作台或溜板不应移动位置。
安装水平的检验要求数控机床完成就位和安装后,在进行几何精度检验前,通常要在基础上先用水平仪进行安装水平的调整。机床的安装水平调平的目的是为了取得机床的静态稳定性,是机床的几何精度检验和工作精度检验前提条件,但不作为交工验收的正式项目,即几何精度和工作精度检验合格,安装水平是否在允许范围不必进行交验