中频熔炼炉感应器主要由感应圈,汇流条相冷却水管等三部分组成。感应圈的电流密度高达6000A/mm,为了减小电耗.常用黄铜管或紫铜管制造。管截面呈矩形,管壁厚度为≈0.5mm(高频)或≈1.5mm(中频)。汇流条的功能是将设备输出电流导人感应器。它的长度要尽量小,截面面积应足够大。目的是减小由它的阻抗产生的电耗。冷却水管的作用是向感应圈中通入冷却水,防止感应器因温度升高而畸变或烧穿。
中频熔炼炉中高频感应加热炉,感应器的外形尺寸根据加热表而的轮廓确定,展示了3种典型。感应器与T件之间必须有一定间隙,而且各处的间隙应均匀一致。否则间隙较小的部位表面电流密度将大于其他部位,从而使工件表面加热不均匀。
中频熔炼炉 这种现象叫做邻近效应。为了消除这种影响,对外圆及内孔表面加热时应使工件旋转,加热平表时与感应器应进行相对位移。间隙大小应该适当。间隙过大会使热效率降低,间隙过小会给感应器的制造与安装带来许多困难。