玻璃钢产品胶衣层涂制时需要注意:配置胶衣树脂时,要充分混合,特别是使用颜料糊时,若混合不均匀,会使制品表面出现斑点和条纹,这不仅影响外观,而且还会降低它物理性能。为此应尽可能采用机械搅拌进行混合,且较好用不产生漩涡的混合机,以避免混进空气。
玻璃钢产品的防腐:主要的原材料是玻璃钢,而大部分玻璃钢产品制上都有纤维缠绕,纤维缠绕玻璃钢产品制结构上分内衬层、结构层及外保护层三部分。其中,内衬层树脂含量高,一般在70%以上,其内表面富树脂层树脂含量高达95%左右。通过对内衬所用树脂的选择,可使玻璃钢产品在输送液体时具有不同的耐腐蚀性能,从而满足不同的工作需要;对需外防腐的场合,只需对外保护层树脂进行认真选择,便也可达到不同外防腐的使用目的。
提高玻璃钢产品的表面质量:胶衣树脂:为提高玻璃钢产品表面质量,产品表面一般需要一层带有颜色的富树脂层。胶衣树脂就是这种材料。胶衣树脂提高了玻璃钢产品的耐老化性,同时为玻璃钢产品提供一个均质的表面,提高了产品的表面质量。一般为保证产品有一个较好的表面质 量,要求胶衣层厚度在0.4?0.6mm。