调平机床时应使机床处于状态,不应采用紧固地脚螺栓局部加压等方法,强制机床变形使之达到精度要求。对于床身长度大于 8m的机床,达到“自然调平”的要求有困难时,可先经过“自然调平”,然后采用机床技术要求允许的方法强制达到相关的精度要求
应以机床的工作台或溜板为安装水平检验的基础,并用水平仪按机床纵向和横向放置在工作台或溜板上进行测量,但工作台或溜板不应移动位置。4.应以水平仪在床身导轨纵向等距离移动测量,并将水平仪读数依次排列在坐标纸上画垂直平面内直线度偏差曲线,其安装水平应以偏差曲线两端点连线的斜率作为该机床的纵向安装水平。横向应以横向水平仪的读数值计。5.应以水平仪在设备技术文件规定的位置上进行测量
山东重联起重在开业至今,先后为中国重汽、中电装备、积成电子、铁路车轮厂、中建八局、中铁十局、中铁十四局、上海台佳实业、山东鲁电集团、济南吉利汽车、济南青年汽车、力诺集团、昌星电子、上海大众、济南二机床厂、天津锻压、合肥锻压、徐州锻压、海天注塑机、震雄注塑机、烟台***、烟台中集来福士船厂等180多家国内、国际***企业开展合作,建立务实、互信、互利、共赢的合作关系。