预调精度的检验要求预调精度检验是机床装配或安装时,对机床有关的几何精度作预先调整和过渡性的试验。通过预调精度检验,使相应的几何精度检验达到规定的允许偏差范围内,并减少其调整的工作量。预调精度的调整特别是对于重型车床、落地铣镗床、龙门刨床等大型机床,可使安装单位和用户少走弯路,便于达到几何精度要求
每一垫铁组应放置整齐、平稳且接触良好。3、机床调平后,垫铁组伸人机床底座底面的长度应超过地脚螺栓的中心,垫铁端面应机床底面的外缘,平垫铁宜10 -30mm,斜垫铁宜10 -50mm,螺栓调整垫铁应留有再调整的余量
例如龙门刨床床身导轨在垂直平面内的直线度,当工作台放上去后原有直线度便发生了变化。且无法测量,只要工作台有关几何精度检验合格,至于导轨的直线度是否合格,变化如何可以不管。如果工作台有关几何精度检验不合格。