玻璃钢制品胶衣树脂剥落解决办法:(1)模具表面多抛光几次,使胶衣树脂不会粘附在模具上。 (2)避免使用软的、能渗透胶衣树脂的石蜡。 (3)在铺敷之前保持胶衣表面清洁,否则会使辅层用树脂与胶衣树脂粘结不好。
玻璃钢制品的防腐:主要的原材料是玻璃钢,而大部分玻璃钢制品制上都有纤维缠绕,纤维缠绕玻璃钢制品制结构上分内衬层、结构层及外保护层三部分。其中,内衬层树脂含量高,一般在70%以上,其内表面富树脂层树脂含量高达95%左右。通过对内衬所用树脂的选择,可使玻璃钢制品在输送液体时具有不同的耐腐蚀性能,从而满足不同的工作需要;对需外防腐的场合,只需对外保护层树脂进行认真选择,便也可达到不同外防腐的使用目的。
玻璃钢制品光泽度不高的原因:玻璃钢制品的表面光泽度不佳现象,常见的有:局部出现无光斑片,或者全部表面失去光泽。制品过早地脱模:或脱模剂选择不好 ;或模具的表面不干燥。