聚乙烯混料仓衬板的安装流程如下: 1. 在基础表面平整、干燥的状况下,根据设备尺寸进行拼装平台制作。平台上必须保持平展无杂物。紧固好所有预埋件并检查焊接点是否渗漏水 。 2 . 将已加工好的储罐内衬板部件按照顺序排放整齐备用;3.. 使用磨光机将锚栓孔洞边缘毛边处理光滑,使用电钻固定顶丝攻丝完毕后抹上黄油;4 .. 根据现场情况对钢板开坡口以便于后期满焊操作 ;5.。 检查材料数量及整体结构完整性 ,6 按要求把每个角落都填实至与邻近钢架梁接触牢固 ,7 对角线逐个由里到外 进行施压使整个垫层受力均匀8 用二氧化碳气体保护焊打底焊接内部骨架(有条件的话采用弧焊效果更佳),用扁铁连接筋和工字钢立柱地脚螺栓链接9一步是铺设PE片材同时确保其粘结的紧密性。完成以上步骤之后即可验收并进行试运行了!希望这些信息对你有所帮助哦~