不锈钢电解利用金属在电解液中受到电化学腐蚀,更确切地叫作电化学阳极溶解,使工件加工成形,电解加工在加工时工件接直流电源的阳极,工具接上电源的阴极,工具向工件缓慢的进给,使两极之间保持较小的间隙,一般只有1mm以下,这时阳极工件的金属被电解腐蚀,腐蚀产物随后会由高速的和有一定压力的电解液带走。
不锈钢电解有两种解决方法:对于这个问题的解决。而未中和,因很多公司在进行过水时就直接是过清水。清水在被反复使用后,电解液残留在水槽内,所以会导致过水时工件外表会有残留药,所以工件在电解抛光后,需进行中和再清水,即可解决发黄的问题; 将发黄的工件进入到20%浓度浸泡两分钟即可。
不锈钢电解“镜面”在不锈钢在行业中应该属于“8K”表面。常见镜面不锈钢分为6K、8K、10K(一般是普通抛光,普通6K,精磨8K,强精磨10K效果)这三种,一般8k的镜面不锈钢就已经达到了普通镜子的光面效果,6K的不锈钢只是表面有一定的亮度,还称不上是镜面不锈钢;10K和12K的效果好,12K镜面不锈钢,表面超清晰,无磨头花、无划痕,可以说是0瑕疵的镜面不锈钢,但研磨成本高,所以价格也是较高的。