应确认提升高度。根据吊车的机型,能把吊钩提升的高度都有具体规定。 应预先估计绑绳套用钢丝绳的高度和起吊货物的高度所需的余量,否则不能把货物提升到所需的高度。应留出臂杆底面与叫货之间的空隙
、检查各安全保护装置和指示仪表应齐全。 2、燃油、润滑油、液压油及冷却水应添加充足。 3、开动油泵前,先使发动机低速运转一段时间。 4、检查钢丝绳及连接部位应符合规定。 5、检查液压是否正常。 6、检查轮胎气压及各连接件应无松动。
采用回转法或扳倒法吊装塔罐时,塔体底部安装的铰腕必须具有抵抗起吊过程中所产生水平推力的能力,起吊过程中塔体的左右溜绳必须牢靠,塔体回转就位高度时,使其慢慢落入基础,避免发生意外和变形