手糊玻璃钢制品胶衣层的厚度要适宜,不能太薄,但也不能太厚,如果胶衣太薄,可能会固化不完全,并且胶衣背面的玻璃纤维容易显来,影响外观质量,起不到美化和保护手糊玻璃钢制品的作用;若胶衣过厚,则容易产生龟裂,不耐冲击力,特别是经受不住从制品反面方向来的冲击。胶衣涂刷不均匀,在手糊玻璃钢制品脱模过程中也容易引起裂纹,这是因为表面固化速度不一,而使树脂内部产生应力的缘故。
提高手糊玻璃钢制品的表面质量:树脂粘度:手糊玻璃钢制品树脂粘度一般在170~117cps之间。树脂粘度范围较宽,利于选择。但由于同一牌号树脂粘度上下限差约在100cps~300cps ,冬、夏季粘度也会 有明显的变化。因而需要进行试验来筛选确定适合 粘度的树脂。
手糊玻璃钢制品胶衣树脂剥落解决办法:(1)模具表面多抛光几次,使胶衣树脂不会粘附在模具上。 (2)避免使用软的、能渗透胶衣树脂的石蜡。 (3)在铺敷之前保持胶衣表面清洁,否则会使辅层用树脂与胶衣树脂粘结不好。